Kegerator Line Cleaning Kit Washout Keg Corny keg

This kit provides all the necessary equipment to clean beer lines and taps on a ball-lock kegerator, ensuring your beer stays fresh and flavorful.

• 10L PET King Keg with Ball Lock fittings
• 250g Alkaline Brewery Cleaner (ABC) Powder

Instructions:

• Disconnect the liquid and gas disconnects from the keg.
• If the lines are dirty, rinse with water, ensuring the water temperature does not exceed 50??C if using warm water.
• Mix at least 1L of cleaning solution for each beer line, following the dilution instructions for the cleaner. Add the solution to the washout keg and attach the appropriate fittings.
• Connect the ball lock disconnects to the washout keg and open the tap to allow approximately 200ml of cleaner to flow through into a collection vessel. Close the tap and let the cleaner sit in the lines for at least 15 minutes, or longer for heavily soiled lines.
• Repeat the process for multiple lines if necessary, flushing with fresh cleaning solution to dislodge debris.
• Flush the lines with clean water to remove residual cleaning solution.
• Rinse the washout keg and refill with at least 500ml of water per line to rinse out the cleaner from the lines.
• Reconnect the cleaned lines to the beer keg and enjoy fresh, clean beer.

Package Content:

• 10L PET King Keg with Ball Lock fittings
• 250g Alkaline Brewery Cleaner (ABC) Powder